CONSTRUCTION
spindles
Cameras
Heads
Toe Games
Nozzles
Load Bocas
Columns
REPAIR
spindles
Cameras
Full Closures
Integral reconstruction
MAINTENANCE
Injection and Extrusion
other Peripherals

products

We perform quick repairs and with the highest quality . All types of construction leading to injection molding machines with valve closure ball and conical tip , nozzles and nozzle holder .

In our spindle repairs bring materials with chromium, cobalt and tungsten carbide , grinding and polishing to touch again.

Repaired cameras , enlarging the inside diameter will return to give the nitriding treatment

HUSILLOS

The different types of screws are ground , polished discount and also the threads are coated with stellite welding to the extent of the camera, or nominal size and polished to tight end in his chambers .

The spindle carrying a chrome tratatamiento are descromados , ground and finally re- chroming . In both nitrided and bimetallic screw ends the treatment process and nitrided .

We repair all possible parts , which are related to the plasticizing cylinder heads are reconditioned and links , lapping and grinding the heads . Toe, build caps valves and seats, if the dropouts can be reconditioned .

In addition , more spindles build profiles used in the processing market of plastics, rubbers , rubbers, silicones , etc. .

Just as our own designs that ensure increased production of the plastic material used by our customers.

CAMERAS

Camera encasquillamos rectify and if badly damaged . What we do is lapping and let the nominal with a tolerance adapting to screw the camera to be housed .

In the case of repair , the procedure is encasquillar and adjusting screw to fit. If it is nitrided chambers , they receive a nitriding treatment .

Nitrided chambers once are verified and checked for wear , are ground , lapped nominal measure , or to a larger diameter are subsequently taken to a nitriding treatment layer 0.5 mm.

Also, if the camera is very poor , we will encasquillar getting respect the nominal , and able to adjust the screw to this measure.

The extruders double cameras are repaired, removed caps being worn and rectifying bimetallic . Build new bimetallic bushes and encasquillamos the cameras leaving them new .



We have at our disposal the most comprehensive stock of all complementary elements: heads , screw tips , games ferrules, interchangeable nozzles and so on .

  • Load Bocas
  • Columns
  • full Closures
  • comprehensive Reconstruction
  • injection

We repair and rebuild machines closures groups of up to about 16 tons tonnage. These closures are transported to our factory, disassembled, repaired and reassembled.

Courses are planned and recondition a rough measure 1200x1200

Repair columns are descromadas, rectified and re-chroming. If they are in poor condition are built with mat. F-125 ttdo. and chrome nominal thickness.

OBJECTIVES

Our goals are primarily based on providing a complete service and obtaining the complete satisfaction of our customers.